+++ /dev/null
-This is a port of GNU Libiconv 1.8 to MSDOS/DJGPP.
-
-1.: DJGPP specific changes.
- =======================
- There are no DJGPP specific changes. This package should
- configure and compile out-of-the-box.
- Please read the documentation to become familiar with this
- product.
-
-
-2.: Installing the binary package.
- ==============================
-
-2.1.: Copy the binary distribution into the top DJGPP installation
- directory and unzip the binary distribution running *ONE* of
- the following commands:
- unzip32 licv18b.zip or
- djtarx licv18b.zip or
- pkunzip -d licv18b.zip
-
-
-
-3.: Building the binaries from sources.
- ===================================
-
-3.1.: To build the binaries you will need the following binary packages:
- djdev203.zip, bsh204b.zip, gcc2952b.zip,
- bnu210b.zip, mak3791b.zip, fil316b.zip,
- shl112b.zip, txt20b.zip, txi40b.zip,
- grep24b.zip and sed302b.zip
-
-
- All this packages can be found in the v2gnu directory of any
- Simtel.NET mirror.
- You will need bsh204b.zip and *NOT* a prior version or the build will fail.
- The same applies to djdev203.zip. You *MUST* use the updated versions of
- fil316b.zip (date: 2000-05-30) and shl112b.zip (date: 2000-08-11). This
- updated versions have been recompiled with djdev203.zip and know about
- the "/dev/env" functionality introduced with djdev203.zip. All the other
- packages are the ones I have used to build the binaries from this sources.
- Previuos and/or later versions of this packages may do the job as well but
- I have not tested this.
-
-3.2.: Create a temporary directory and copy the source package: licv18s.zip
- into the temporary directory. If you download the source distribution
- from one of the DJGPP archives, just unzip it preserving the directory
- structure, runnig ONE of the following commands:
- unzip32 licv18s.zip or
- djtarx licv18s.zip or
- pkunzip -d licv18s.zip
-
- Source distributions downloaded from one of the GNU FTP sites need
- some more work to unpack. First, you MUST use the `djtar' program to
- unzip the package. That's because some file names in the official
- distributions need to be changed to avoid problems on the various
- platforms supported by DJGPP. `djtar' can rename files on the fly
- given a file with name mappings. The distribution includes a file
- `djgpp/fnchange.lst' with the necessary mappings. So you need first
- to retrieve that file, and then invoke `djtar' to unpack the
- distribution. Here's how:
-
- djtar -x -p -o libiconv-1.7/djgpp/fnchange.lst libiconv-1.7.tar.gz > lst
- djtar -x -n lst libiconv-1.7.tar.gz
-
- (The name of the distribution archive and the top-level directory will
- be different for versions other than 1.7.)
-
-3.3.: The package is preconfigured for djdev203. To build the products you
- should run the following command:
- make
-
- After the compilation has finished, you can check the products
- running the command:
- make check
-
- To install the products run the command:
- make install
-
- This will install the products (iconv.exe iconv.h libcharset.h libconv.a
- libcharset.a iconv.1 iconv.3 iconv_open.3 iconv_close.3) into your DJGPP
- installation tree. As usual, prefix is defined as "/dev/env/DJDIR".
- If you prefer to install into same other directory run the command:
- make install prefix=z:/some/other/dir
-
- Of course, you should replace "z:/some/other/dir" by an appropriate path
- that will meet your requeriments.
-
-3.4.: If you need/want to reconfigure the package you will have to run the
- following commands:
- make distclean
- djgpp\config
-
- Please note that you *MUST* use the "distclean" option or the config.cache
- file will *NOT* be deleted. In this case you are *NOT* reconfiguring
- because the configuration informations is read from the cache file instead
- of being newly computed.
- To build the programs in a directory other than where the sources are,
- you must add the parameter that specifies the source directory,
- e.g:
- x:\src\gnu\libiconv.18\djgpp\config x:/src/gnu/libiconv.18
-
- Lets assume you want to build the binaries in a directory placed on a
- different drive (z:\build in this case) from where the sources are,
- then you will run the following commands:
- z:
- md \build
- cd \build
- x:\src\gnu\libiconv.18\djgpp\config x:/src/gnu/libiconv.18
-
- You *MUST* use forward slashes to specify the source directory.
- After having configured the package run the folowing commands to create
- the binaries and docs and install them:
- make
- make check
- make install
-
- Send suggestions and bug reports concerning the DJGPP port to
- comp.os.msdos.djgpp or djgpp@delorie.com. Libiconv specific bugs
- must be reported to Bruno Haible <haible@clisp.cons.org>.
-
-
- Guerrero, Juan Manuel <st001906@hrz1.hrz.tu-darmstadt.de>
projects / TestXSLT.git / blobdiff